Click image to view full size image
Automatic Gas Chromatography Software Control Program For Gas Analysis
GC650
5 kinds of sample injectors and all conventional detectors can be attachable depending on samples for analysis. In particular, for analysis of environmental samples (water quality, air, soil and wastes) satisfactory outcome can be achieved by connecting a sample preparation system such as the Purge & Trap.
Features of the GC650
- Automatic flow control and ignition of the FID-flame
- Auto-start of chromatogram when sample is injected
- Gas save function (Capillary Injector)
- TCD maximum current control based on the type of gas
- Optional valves (solenoid, 2-position) control function
- Automatic notification of power-off
GC650 control software
Easy and Excellent Control
- Exact flow/pressure control by IPC (Intelligent Pneumatic Control)
- Auto ignition of FID flame
- Auto control of TCD current
- Auto start function as sample injection (Better reproducibility)
- Check for GC operation by STATUS INFORMATION window
- Auto repeat analysis function
- Can Control 2-Position Valves (2ea) and Solenoid Valves (6ea)
- Gas save function
Safety Function
- In case of FID flame off, auto off for Air/H2/Make-up gas flow (available from next version)
- TCD Filament protect function: Current off when the Carrier/Reference Gas does not flow (available from next version)
- Automatic notification of power-off: It informs turning off the GC safely by one clicking of the disconnect button
- Auto shutdown function when some problem happen by each device
GC650 Specifications
| Column Oven | |||
| Inner volume | 16.25 liter (250mm W* 260mm D*250mm H) | ||
| Temperature Range | Ambient to 450 (Optional: -100 to 450 by using a cryogenic valve) | ||
| Linear Programming Rate | Max: 120/min up to 450/min (0.1 increment) | ||
| Heating Rate | about 2.3 minutes 50 to 300 | ||
| Cooling Rate | about 6 minutes 300 to 50 | ||
| Run Time | Automatically computed to 999.9 minutes by 0.1 minute increments | ||
| Temp. Programming | 20 Step | ||
| Pneumatics (IPC Module) | |||
| IPC pressure range | 0 to 100psi | ||
| IPC flow range | 0 to 500mL/min | ||
| Pressure resolution | 0.01psi | ||
| Flow resolution | 0.01mL/min | ||
| Support IPC Channels | Up to 20, for inlets, detectors or auxiliary gases (including pressure channel) | ||
| Pressure/flow programming steps | up to 5 steps | ||
| EPC control | Inlets and detectors (carrier, split vent, make-up and combustion gases) | ||
| Split ratio | up to 5000: Automatic Gas Chromatography Software Control Program For Gas Analysis |
 Sell
New Login
Company QR code Anytime Anywhere Mobile |
|