Click image to view full size image
Automatic Gas Chromatography Equipment Inlet System , GC650 Gas Analysis Equipment
GC650
5 kinds of sample injectors and all conventional detectors can be attachable depending on samples for analysis. In particular, for analysis of environmental samples (water quality, air, soil and wastes) satisfactory outcome can be achieved by connecting a sample preparation system such as the Purge & Trap.
Features of the GC650
- Automatic flow control and ignition of the FID-flame
- Auto-start of chromatogram when sample is injected
- Gas save function (Capillary Injector)
- TCD maximum current control based on the type of gas
- Optional valves (solenoid, 2-position) control function
- Automatic notification of power-off
Inlet System: Excellent accuracy, reproducibility
Packed Inlet
- 1/4”, 1/8” Glass-lined metal Liner are available
- On-Column injection method (direct injection of sample into column) is available using 1/4” Glass Column
- 0.53mm ID Capillary Column can be used
Capillary Inlet
- High resolution, prompt analysis time and most typical inlet system
- Split and Splitless mode can be selectable
Auto Injector/Sampler
- Dual inlet injection capability
- Variable injection/syringe fill rates
- Methods linking
- Multiple solvent/waste bottles
- Syringe range 5uL-250uL
- Air gapping capability
- Multiple tray options: 120 vials, 1.8mL; 220 vials, 0.8mL; 60 vials, 10mL
Gas Sampling Valve
- Two Valves can be controlled by Air Actuation
- Full automation system is built along with the automatic Run/Stop function
GC650 Specifications
| Column Oven | ||
| Inner volume | 16.25 liter (250mm W* 260mm D*250mm H) | |
| Temperature Range | Ambient to 450 (Optional: -100 to 450 by using a cryogenic valve) | |
| Linear Programming Rate | Max: 120/min up to 450/min (0.1 increment) | |
| Heating Rate | about 2.3 minutes 50 to 300 | |
| Cooling Rate | about 6 minutes 300 to 50 | |
| Run Time | Automatically computed to 999.9 minutes by 0.1 minute increments | |
| Temp. Programming | 20 Step | |
| Pneumatics (IPC Module) | ||
| IPC pressure range | 0 to 100psi | |
| IPC flow range | 0 to 500mL/min | |
| Pressure resolution | 0.01psi | |
| Flow resolution | 0.01mL/min | |
| Support IPC Channels | Up to 20, for inlets, detectors or auxiliary gases (including pressure channel) | |
| Pressure/flow programming steps | up to 5 steps | |
| EPC control | Inlets and detectors (carrier, split vent, make-up and combustion gases) | |
 Sell
New Login
Company QR code Anytime Anywhere Mobile |
||